Designed for hospital emergency room and trauma centre
Integrated storage tray with oxygen tank through is made with ABS plastic
Structure with 4 sections
Backrest adjustable by gas spring
Kneerest brake adjustable by gas spring
Hi-Lo adjust by twin hydraulic system
Full length X-Ray radiolucent base with sliding X-Ray cassette tray with grid line
Hands free trendelenburg and reverse trendelenburg operated by hydraulic foot pedal at both sides of stretcher
Collapsible siderail
Drainage bag holder x2
Four wheels brake pedal/ steer pedal at both ends
Push handles at both ends
Telescopic stainless steel IV drip pole with hooks
Protective corner bumper x 4
Adjustable IV pole
Additional 5th wheel steering system
Technical Specifications
Safety load: 318kg
Backrest : 0° – 90°
Legrest : 0° – 35°
Trendelenburg : 0° – 18°
Reverse Trendelenburg : 0° – 18°
Castor Approx Dim (mm): 200mm (central locking)
Mattress Approx Dim (mm): 1950(L) x 720(W) x 100(Thick)
Approx Dim (mm): 2130(L) x 850(W) x 640 – 990(H)
PT5512 | Hospital Patient Transport Trolley/Bed
Product Features
Material: Mild steel framework
Finishing: Epoxy powder coating
Hydraulic foot pedal controlled Hi-Lo position
Hands free trendelenburg & reverse trendelenburg operated by foot pedal
Backrest adjustable by gas spring
Kneerest adjustable by manual crank
Integrated storage tray with oxygen cylinder holder
Structure with 4 columns
Drainage bag holders x2
Collapsible siderail
Four wheels brake pedal/ steer pedal at both ends
Adjustable IV pole
Push handles at both ends
Protective corner bumper x 4
Telescopic stainless steel IV drip pole with hooks
Castor Dim (mm) : 200mm (central locking)
Additional 5th wheel steering system
Technical Specifications
Safety load : 318kg
Backrest : 0° – 90°
Legrest : 0° – 45°
Trendelenburg : 0° – 18°
Reverse Trendelenburg : 0° – 18°
Castor Dim (mm): 200mm (central locking)
Mattress Dim (mm): 1950(L) x 660(W) x 80(Thick)
Approx. Dim (mm): 2130(L) x 810(W) x 540 – 890(H)
PT5511 | Hospital Patient Transport Trolley/Bed
Product Features
Material: Mild steel framework
Finishing: Epoxy powder coating
Hydraulic foot pedal controlled Hi-Lo position
Hands free trendelenburg & reverse trendelenburg operated by foot pedal
Backrest adjustable by gas spring
Integrated storage tray with oxygen cylinder holder
Drainage bag holder provided at both sides
Structure with 2 sections
Collapsible siderail
Four wheels brake pedal/ steer pedal at both ends
Adjustable IV pole
Push handles at both ends
Protective corner bumper x 4
Telescopic stainless steel IV drip pole with hooks
Castor Dim (mm) : 200mm (central locking)
Additional 5th wheel steering system
Technical Specifications
Material : Mild steel
Finishing : Epoxy powder coating
Safety load : 318kg
Backrest : 0° – 90°
Trendelenburg : 0° – 18°
Reverse Trendelenburg : 0° – 18°
Mattress Approx Dim (mm) : 1950(L) x 660(W) x 80(Thick)
Approx Dim (mm) : 2130(L) x 810(W) x 540 – 890(H)
PT6688 | Lateral Patient Transport Trolley
Product Features
Material: Mild steel framework
Finishing: Epoxy powder coating
Each chassis has a frame welded tubular steel and is designed to lock side-to-side with a second chassis to permit lateral transferring of the platform
Instant trendelenburg tilt is available in smooth stepless action any angle up to 12° is available and is held by a safe friction lock
8” diameter central locking castors with steering, free and total brakes
Protective bumpers fitted at each corner
Double hook IV Pole and Stainless Steel Tray
Transfer platform is constructed of a double tier, square tube, steel frame and has a ratchet operated rising backrest up to 70°
The mattress support is fully radio translucent and by utilizing the movable X-Ray cassette situated under the mattress platform
Full length X-Ray photography is achievable
The platform transfer smoothly and using special low friction tubes on the transverse rails of the chassis Telescopic chrome plated side rails
IV sockets situated end of platform to allow unimpeded transfer of the patient on a drip
The platform complete with 5cm (2”) thick, radio translucent, foam mattress with water proof, fire retardant, anti-bacterial treated, anti-static & stain resistant
The sterile area chassis with transfer platform can be used as a recovery room trolley c/w all necessary facilities for anaesthetic and post-operative procedures
Technical Specifications
Backrest: 0° – 70°
Trendelenburg: 0° – 12°
Castor Dim(mm): 200mm
Mattress Approx Dim(mm): 1830(L) x 560(W) x 50(H)
Approx Dim(mm): 2046(L) x 686(W) x 810(H)
PT6699 | Longitudinal Patient Transfer Trolley
Product Features
Each chassis has a frame welded tubular steel and is designed to lock end-to-end with a second chassis to permit longitudinal transferring of the platform
Locking hand lever available on both trolleys and by single hand operated
Instant foot up tilt by smooth steeples action at angle up to 12°held by a safe friction lock
8” diameter central locking castors with steering, free and total brakes
Protective bumpers fitted at each corner
Four hooks IV Pole
Each platform is constructed of a double tier, square tube, steel frame and has a ratchet operated rising backrest up to 70°
The mattress support is fully radio translucent and by utilizing the movable X-Ray cassette situated under the mattress platform and full length X-Ray photography is achievable
The platform transfer smoothly and using special low friction bearings on the transverse rails of the chassis
Telescopic chrome plated side rails
IV sockets situated end of platform to allow unimpeded transfer of the patient on a drip
The platform complete with 5cm (2”) thick, radio translucent, foam mattress with water proof, fire retardant, anti-bacterial treated, anti-static & stain resistant
The sterile area chassis with transfer platform can be used as a recovery room trolley c/w all necessary facilities for anaesthetic and post-operative procedures
Technical Specifications
Single trolley Approx Dim (mm): 2092mmL x 717mmW x 865mmH
Overall Approx Dim (mm)(during transfer): 4004mmL x 717mmW x 865mmH
PT4000-GS | Hospital Patient Transport Trolley/Bed
Product Features
Safety friction lock tilting operated by gas spring
Hydraulic foot pedal controlled Hi-Lo position (both side)
Backrest adjustable by gas spring
PVC bumper guard rail
Push handle at head end
Patient transfer board
Additional 5th wheel steering system
Collapsible side rails
Telescopic IV pole
Storage utility tray
X-ray translucent mattress board c/w sliding type cassette holder
Vertical Oxygen tank holder
Technical Specifications
Material : Mild steel frame work
Finishing : Epoxy powder coating
Safety load : 250kg
Backrest : 0° – 90°
Trendelenburg : 0° – 12°
Reverse Trendelenburg : 0° – 6°
Castor Dim (mm) : 200mm.
Mattress Approx Dim(mm) : 1905(L) x 597(W) x 100(H)
Approx Dim(mm) : 2070(L) x 750(W) x 622 – 942(H)
PT3100-GS | Hospital Patient Transport Trolley/Bed
Product Features
Gas spring Tilting
Hydraulic foot pedal controlled Hi-Lo position
Backrest adjustable by gas spring
PVC bumper guard rail
Push handle at foot ends
Collapsible side rails
Telescopic IV pole
Storage utility tray
X-ray translucent mattress board c/w sliding type cassette holder
Oxygen tank holder
Technical Specifications
Material : Mild steel frame work
Finishing : Epoxy powder coating
Safety load : 250kg
Backrest : 0° – 90°
Trendelenburg : 0° – 12°
Reverse Trendelenburg : 0° – 6°
Castor Dim (mm): 200mm (central locking)
Mattress Approx Dim(mm) : 1905(L) x 597(W) x 100(H)
Approx Dim(mm) : 2070(L) x 750(W) x 622 – 942(H)
PT3300-GS | Patient Transport Trolley
Product Features
Hydraulic foot pedal controlled Hi-Lo position
Tilting assisted by gas spring
Backrest adjustable by gas spring
PVC bumper guard rail
Push handle at foot ends
Collapsible side rails
IV pole
Storage utility tray
Oxygen tank holder
Technical Specifications
Material: Mild steel frame work
Finishing : Epoxy powder coating
Safety load : 250kg
Backrest : 0° – 90°
Trendelenburg : 0° – 12°
Reverse Trendelenburg : 0° – 6°
Castor Dim(mm) : 200mm (central locking)
Mattress Approx Dim(mm) : 1930(L) x 660(W) x 50(H)
Approx Dim(mm) : 2100(L) x 787(W) x 558 – 878(H)
PT2010 | Patient Transport Trolley
Product Features
Ratchet backrest
Removable/interchangeable head panel
Telescopic chrome side rails
Provision for I.V pole and oxygen cylinder
Protective bumper located at four corners
Storage utility tray
Gas spring trendelenburg/tilting
Technical Specifications
Material: Mild steel frame work
Finishing : Epoxy powder coating
Safety load : 180kg
Backrest : 0° – 90°
Trendelenburg: 0° – 16°
Reverse Trendelenburg: 0° – 6°
Castor Dim (mm): 200mm dia.
Approx Dim(mm): 2083(L) x 730(W) x 756(H)
PT2001 | Patient Transport Trolley
Product Features
Ratchet backrest
Removable head panel
Lifting Chrome side rails
Provision for I.V pole and oxygen cylinder
Protective bumper located at four corners
Storage utility tray
Two ways trendelenburg / tilting by means of smooth winding mechanism located at both ends of trolley
Technical Specifications
Material : Mild steel frame work
Finishing : Epoxy powder coating
Safety load: 180kg
Backrest : 0° – 60°
Trendelenburg: 0° – 12°
Reverse Trendelenburg: 0° – 12°
Castor Dim (mm): 125mm dia. (*optional: 200mm dia)
Approx Dim(mm): 1934(L) x 714(W) x 762(H)
PT2000 | Patient Transport Trolley
Product Features
Removable / interchangeable head panel
Sliding epoxy side rails
Provision for I.V pole and oxygen cylinder
Protective bumper located at four corners
Trendelenburg / tilting and backrest positioning by means of smooth winding mechanism
Technical Specifications
Material : Mild steel frame work
Finishing : Epoxy powder coating
Safety load: 180kg
Backrest : 0° – 80°
Trendelenburg: 0° – 6°
Castor Dim (mm): 125mm dia. (*optional: 200mm dia.)
